DSL and cable modems: High speed and low cost

New data networking services
New technologies, such as the Internet and video-on-demand, have caused a strong hunger in the marketplace for more bandwidth. Everybody wants to send more data at faster speeds. Many large companies pay for a T-1 connection to the Internet, but smaller businesses do not spend their money as freely. Most residences and many small businesses are far away from the telephone company central office, so it is too costly for carriers to offer advanced data services at an affordable price. The little guys have been left out—until recently.

DSL and cable modems: High speed and low cost
During the last few years, the phone companies have looked for new ways to offer high bandwidth services to small businesses and consumers. The two most prominent technologies that have recently stormed the market are digital subscriber line (DSL) service and cable modems. Both services offer bandwidth up to 1.544 Mbps for less than $100 per month. That means a consumer can get T-1 bandwidth without paying $1,000 a month for it.

DSL service is being widely adopted by both small businesses and consumers. Cable modems have been most attractive to consumers, probably because most homes are already wired for cable TV service.

Both DSL and cable modem service are dedicated connections. The line is always available for Internet use. Cable modems do not have to “dial-up” the specific ISP; they are always connected to the ISP. In addition to unlimited Internet access, most DSL and cable modem service providers give their customers e-mail accounts and Web site hosting as part of the monthly service.

According to Computer Economics, cable modem subscribers in the United States will increase from 5.7 million in 2000 to 27.6 million in 2005. DSL subscribers are expected to increase from 2.4 million in 2000 to 13.8 million in 2005.

DSL
As previously explained, the “last mile” of copper wiring from the telephone company’s central office to a business or residence has limited bandwidth capacity. End users demand lots of bandwidth, and phone companies want to earn revenue from this opportunity. DSL technology is a recent development that should satisfy both consumers and phone companies.

DSL deployment began in 1998. Since then, both computer manufacturers and telephone companies have not yet ironed out a single standard for DSL service. Consequently, numerous flavors of DSL are being offered today. The whole family of DSL services is often referred to as xDSL, with the “x” representing any number of other letters such as ADSL, CDSL, UDSL, VDSL, G.Lite, DSLLite, and freeDSL.

DSL offers a lot of bandwidth to small companies and consumers at phenomenally low rates. A typical DSL customer can receive 1.544-Mbps bandwidth across an ordinary copper telephone line for around $50 per month. That amount of bandwidth has previously only been available to businesses that paid as much as $1,500 per month for T-1 service.

DSL technology sends a digital signal across a traditional twisted-pair copper telephone line. Because the signal is never converted to analog, greater bandwidth is available. Like ISDN, DSL service can carry both voice and data simultaneously. A person can surf the Internet and talk on the phone at the same time. DSL uses a dedicated connection to the Internet.

Upstream and downstream
DSL has separate transmission rates for “upstream” and “downstream” data. A person surfing the Internet will receive large amounts of data “downstream” from the Web site because of the numerous graphics and files. The amount of data sent “upstream” is minimal, because the Internet surfer is only sending mouse clicks or occasional keystrokes. DSL service typically offers upstream rates of 128 Kbps, and downstream rates of 1.544 Mbps. Figure 1 illustrates DSL’s differing rates for upstream and downstream traffic.


Figure 1: DSL service uses standard copper telephone wires but can deliver T-1 bandwidth downstream from the carrier.


A DSL customer that wants to use his telephone and computer on the same line must have the signal separated so that the bandwidth can accommodate the phone’s analog signal and the computer’s digital signal.

DSL is available across the United States in most large and mid-size cities. Flashcom, one of the largest DSL providers, offers service for $49 per month. This includes Internet access, and if the customer signs a 24-month term agreement, the equipment is free and installation fees are waived. In Missouri, SBC provides DSL service for $39 a month, or $49 a month with Internet access included. A 12-month term agreement is required with this pricing, and the customer must purchase a “DSL modem” for $198. DSL is a flat-rate service; there are no monthly charges for usage.

Save money with DSL
Besides providing a large amount of bandwidth for Internet usage, DSL can also be used to lower existing telecom costs. A small independent insurance agency in Baltimore, for example, recently signed up for DSL service with a national DSL provider. The service provided a 512-Kbps dedicated connection to the Internet, e-mail, and Web site hosting, and the business could still make analog phone calls over the same line. The business previously paid more than $300 per month for all of these services. See Table 19.1 for a cost comparison of this change.

Cable modems
Cable modems are designed for high-speed Internet connections. Like DSL service, cable modems provide Internet access at different speeds downstream and upstream. The actual bandwidth for Internet connections over a cable line is 27 Mbps downstream and 2.5 Mbps upstream, but the total rate experienced by the end user is normally 1.544 Mbps. That is not too bad, though, considering that today many businesses pay more than $1,000 a month for this amount of bandwidth.

A new cable modem customer needs a service provider and the cable modem itself. Most service providers allow the customer to rent a cable modem; otherwise, the customer must pay around $300 for the device. With Time Warner’s Road Runner service, the subscriber pays a one-time installation fee of $100 and a monthly fee of $40. The monthly fee includes rental of the cable modem and unlimited Internet access. Cable modem users do not pay hourly fees for Internet use.



SONET and DWDM
Three basic types of data networking in use today: dedicated private lines, circuit switching, and packet switching. Specific services that use these technologies include ISDN, frame relay, ATM, and DSL. These services are commonly used by businesses.

Two other data networking technologies bear mentioning here: synchronous optical network (SONET) and dense wave division multiplexing (DWDM). Both SONET and DWDM are technologies used for transmitting data across fiber-optic lines. SONET and DWDM are used within carrier networks and rarely in a customer’s network. A single SONET connection is capable of simultaneously carrying 129,000 conversations.

Voice and data convergence

Voice and data convergence
One of the recent data networking trends is called convergence. Convergence means that different signals such as voice, video, and data are transmitted over a single medium. On the consumer level, Web TV is an example of convergence; cable TV and the Internet are provided across a single cable. At the business level, many companies are migrating their voice long-distance traffic across their data networks.

Businesses have traditionally carried their voice and data traffic over separate networks. The phone companies assigned separate account managers to handle a business’ voice and data needs. The services had separate contracts and were billed separately. As part of the recent streamlining effort of the phone companies, voice and data services now share the same account manager, the same contract, and the same invoice. But the greater change is that voice and data now ride the same phone line.

Voice over frame relay
The main benefit of voice over frame relay (VoFR) is that long-distance calls are free. VoFR is normally only used to carry intracompany long-distance traffic or international long-distance traffic. The latency of packetswitching technology affects the call quality (i.e., conversations may be choppy).

Latency is a term that describes the transmission delay due to the speed of the media and the processing time of the network equipment, such as routers. Each stage in the network may only add milliseconds of delay, but the combined latency may be enough to distort the sound of the phone call. VoFR is, therefore, rarely used for “front office” applications. However, businesses with lots of intracompany long-distance calling can significantly reduce their long-distance billing. By moving their long distance across their frame relay network, they will eliminate the long-distance cost altogether. If they do not mind slightly compromising call quality, thousands of dollars can be saved.

Voice over Internet
Voice over Internet (VoIP) is the same concept as VoFR, except the voice calls are converted to data packets and sent along a network that uses Internet Protocol (IP). The Internet, or a private WAN using IP, are both examples of IP networks. The same latency problems previously described with VoFR apply with VoIP.

On a much smaller scale, cost savings can be achieved by using one of the Internet’s free long-distance Web sites such as http:// www.net2phone.com or http://www.dialpad.com. These services allow a person to make free long-distance calls over the Internet. Most of them limit the destination of the call to the United States, but a few of these services have roots in the Far East and may include Korea or Taiwan as approved calling destinations. Internet phone calls often experience a lot of noise, similar to a shortwave radio conversation, or international calls 5 or 10 years ago. The call quality is poor, but you cannot beat the price.

ATM
ATM is a high-speed packet-switching telecommunications service. ATM is typically used only by very large businesses such as Fortune 100 companies, major universities, and telephone companies. Telephone companies use ATM technology in the “backbone” of their networks. A voice phone call from New York to Tokyo will probably be converted to ATM packets as the data travels along an undersea phone line lying at the bottom of the ocean.

ATM is a high-cost service, designed for high-volume users, and will therefore not be used by most businesses. According to the Vertical Systems Group, only slightly more than 35,000 enterprises worldwide are currently using ATM services, while frame relay has more than 1.2 million subscribers.

Why is ATM so fast?
ATM carries voice, video, and data at speeds up to 622 Mbps. Such a high speed is due to three factors: asynchronous switching, cell length, and the use of hardware in switching. “Asynchronous” means the service transfers different data at different times and can process multiple jobs simultaneously.

ATM’s fixed-length packets, called cells, make ATM more efficient than other technologies, such as frame relay. The size of each frame relay packet must be processed, while ATM networks waste no time figuring out how large or small a packet is. ATM networks expect each packet to be 53-bytes long, and they rapidly move these packets up and down the network.

Another advantage of ATM over frame relay is that the switching is controlled in the network hardware, instead of the software. These three advantages make ATM a very fast data networking technology.

Although ATM may be a fast technology, it is also a costly one. Installing an ATM network is very expensive, and the monthly charges not only include fixed charges for the network, but also usage on an ATM network. ATM is only a cost-effective technology for extremely large businesses.

More?